Step 29 starts the escape motor nozzles. The base is cut from 1/8" dowel stock, into roughly 1/8" long pieces shaping a step on one end for the paper nozzles. My first attempt was horrible (the leftmost one), just trying to use a stiff sanding stick as shown in the instructions. I found that scoring with a #11 blade, and chiseling off tiny bits made a much better piece. I made 4, figuring I'll probably lose one, they're so tiny. I cut the pieces off after making the step.

Attached Thumbnails

 

__________________
Paul
If we weren't all crazy, we would go insane - Jimmy Buffett
NAR #87246 www.wooshrocketry.org