01-04-2021, 03:19 PM
|
|
rosko_racer
|
|
Join Date: Oct 2005
Location: Baltimore, MD
Posts: 306
|
|
Update JAN 2021 - Cloning the F-16
Work has been slow due to reworking the missile and new canopy STL files.
After looking at several real world F-16 pictures I decided to add missile pylons to the wing tips and extra pylons on the bottom of the wings. I took a note from building Sirius' Interrogator by lightly drawing on the paper sticker where I wanted the pylons. Then cut and removed the silhouette to expose the balsa underneath. This gave a chance for the wood glue to create a better "wood-to-wood" bond instead of with the sticker paper.
So now it will carry four missiles and two fuel drop pods. Applied an epoxy fillet to all root edges and a coat of white primer to see where there is a need to sand and prep it for its final white color. Still want to do the drop tanks on a light gray color but it seems that I cannot find the paint locally nor can I find a good acrylic thinner. If I could I would mix it and airbrush it myself.
The missiles will require a little filler and sanding "TLC" before final paint. The "Sidewinders" I also want them light gray. Will see what I can do with what I have...
__________________
_____________________
- Raúl
NAR #88644
SAM #230
EAC
CAT
_____________________
|