08-20-2020, 02:21 PM
|
|
Semi-Pro Rocketeer TRA 10484 L2
|
|
Join Date: Apr 2007
Posts: 428
|
|
Creality 3D printer questions please :)
Hello fellow rocketeers,
I finally got my first 3D printer Creality CR6 SE and can say that I'm loving it! I started with a 20 x 20mm test cube.
I am printing very nicely with basic settings of .2mm Layer setting; 10% fill; .20 Z Axis setting with Creality PLA filament. Nozzle temp 200 and bed 60C.
This printer has 16 point Auto leveling bed.
================================================== ===
Now for my problems
I brought 3D Solutech PLA Filament and am having all kinds of problems.
It seems to not feed through the Extruder smoothly. I can hear a grinding sound as if the extruder gear is slipping.
How do you adjust the extruder filament tension correctly? With the Creality Filament, I was tighten the tension screw so until I the filament wouldn't slip easy, but this doesn't seem to work with the Solutech PLA?
Also, I believe the temp needs to be higher for proper flow? Just was wondering what temp settings you were using for the nozzle and bed to please?
I removed the Solutech and put the Creality filament back in and all is good, so I know the Solutech doesn't like my settings
__________________
=======================
If the Sky is the Limit, then,
why is there Footsteps on the Moon?
=======================
|