12-14-2020, 07:10 AM
|
|
Dazed and Confused
|
|
Join Date: Mar 2005
Location: TN
Posts: 11,624
|
|
Quote:
Originally Posted by ghrocketman
I'm currently working on a Semroc SST Shuttle CC kit.
The cones in this kit are decidedly non Semroc-like in grain/sanding finish.
Both cones have taken SIX coats of Aero Gloss Balsa Fillercoat to fill the grain satisfactorily.
I sanded between coats 2 and 3, 3 and 4 and 5 and 6.
They now have 2 coats of Sanding Sealer and are finally smooth enough to topcoat.
No, the Balsa Fillercoat is not "defective" or thinned too much either. Same consistency as always.
|
I've had an SST built for several years. It's sitting with a coat of filler waiting to be sanded. There is so much to sand, it will probably sit there like that for several more years. I love sanding those nooks and crannies soooo much, I want to savor it over a whole decade.
__________________
I love sanding.
|