06-07-2008, 06:17 PM
|
Master Modeler
|
|
Join Date: Dec 2005
Location: Washington State
Posts: 654
|
|
Thanks for the input Guys.
CPMcGraw Quote:
Quote:
Why not attach some hard dowel stock to the tips? Say, some 1" lengths of 3/32" or 1/8" diameter, with only about 1/8" below the balsa edge? Let this take the impact shock instead of the balsa.
|
That's a good idea Craig, it would definitly help the tip of the fins from damage and/or breaking off .
jay Quote:
Quote:
James, nice work on the Tranquility 1! I love the design! How about a parts list?
|
Let me complete a test launch first. A few week ago at the OPROC launch I preped this design for the test launch and then discovered that I forgot the upper and lower launch lugs. Must be the Dain Bramage thing again .
Some other design change on the Neptune Lander, Spaceman 2006, and the Sky Champ Lander are that I have removed the 13mm motor mount and have converted all three design to 18mm. Plan on trying the A8-3 first and then work my way up to B4-4 and B6-4's.
We will just have to see what happens regardless of what Rocksim says .
Thanks for the input guys, JP.
James Pierson
NAR# 77907
.
|