06-07-2008, 11:49 AM
|
|
BARCLONE Rocketry
|
|
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
|
|
Quote:
Originally Posted by James Pierson
Finally found some time to finish some design files...
|
I know that feeling...
I had to force myself to build something this month, and wound up with a nice set of "K" series clones to add to the collection. The newest clones are a Mark and Mark II, an Aerobee 300, an A-20 Demon, and with a bit more looking around, I found a BNC-20B nose cone to build another Invader. Emptying out the parts bin, I found a spare Tau nose cone (BC-760), and I used this to build up a Tau Draconis prototype (13mm version). Add to this two prototypes of the Dominion Keeper, and you get the idea of what I've done in May...
Feels good, too!
Quote:
...Also, the rearward pointing fins with the ringfin look good, I tend to wonder about how they will fair with ground impact during recovery...
|
Why not attach some hard dowel stock to the tips? Say, some 1" lengths of 3/32" or 1/8" diameter, with only about 1/8" below the balsa edge? Let this take the impact shock instead of the balsa.
|