03-04-2008, 06:12 PM
|
The_Ripper
|
|
Join Date: Jun 2005
Location: Louisiana
Posts: 1,941
|
|
SLS Magnum-D Hornet
SLS Magnum-D Hornet
Upscale based on 5341 Centuri Magnum-D Hornet available from 1980-1983. I based this upscale on BTH-70 tubing also used in the Semroc SLS ARCAS kit. I had purchased an extra nose cone, centering rings and a couple of cut lengths of BTH-70 after I purchased the SLS ARCAS kit so I actually have most of the parts on hand.
Length: 32.9"
Diameter: 2.25" (BTH-70)
Fin Span: 9.89"
Weight: 7.44 oz
One RockSim file has the standard 29mm mount and the other file has the 24mm EM-9115 adapter installed. It's light enough to fly off a standard 36" launch rod with either a D12 or E9 black powder engine and simmed well on many E through G reloads. It shares basswood fins with other SLS type kits and fins mount through the wall to the engine mount. TTW fin tabs can be shortened some but I was looking at the worse case scenario with weight and EM-9115 installed for stability.
The decal in RockSim did not render well {and of course I could not force RockSim to make three of the fins yellow} but you get the basic idea from the 3D image. I would most likely have either Excelsior make an upscale water-slide or use Dave again with Graphix & Stuff for a self adhesive vinyl version.
My plans are to build it so it's in the queue .....
.
__________________
Steve Naquin
TRA# 677 L2
NAR# 85518 L2
SAM# 0052
🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals
🚀 In Paint & Detail: USR Banshee
🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate
🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim
🚀 Stay Tuned For Fall 2021 Launch Dates
|