01-09-2007, 01:46 PM
|
 |
BARCLONE Rocketry
|
|
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
|
|
First File -- A Pre-Production Motor File for RockSim
The following motor file was developed for testing by adapting the Apogee motors from 1/4A through B. Both 10mm and 15mm sizes have been simulated where possible. The motor power/delay curves have not been modified, but the time delay values have been added to cover a number of choices, generally beginning with 2 or 3 seconds, and going as high as 9 seconds. Some of these values will be arbitrarily high, but it allows for simulation tweaking.
Remember: These motors are for testing only, and do not necessarily represent the final production motors. It's just a starting point.
How to use:
Unzip the SEMROC.ZIP to get the SEMROC.RSE file. Save the RSE file in your DATA folder in the RockSim directory. Open RockSim. Click FILE | Reload Engines. Add the SEMROC.RSE file to the list on the right. Close this window. You can now use the SEMROC motors in your designs.
|