08-13-2022, 09:11 AM
|
|
When Pigs Fly!
|
|
Join Date: Sep 2005
Location: Orlando, FL
Posts: 1,102
|
|
You can get a longer blade by extending out one of the cheap break-off blade knives.
Here's a blog post showing a smaller nose cone.
https://modelrocketbuilding.blogspo...ur-build_5.html
The same technique works for larger nose cones,
Start with the blade short and make a shallow cut around the nose cone in a straight line,
Extend your knife blade to cut closer to the center,
Continue until the nose cone splits.
Keep your hands clear of the long blade - It can slip.
Don't use too much pressure - that blade might break off.
|