08-23-2008, 08:17 PM
|
Master Modeler
|
|
Join Date: Dec 2005
Location: Washington State
Posts: 654
|
|
New Design: Sky-Jack
CPMcGraw Quote:
Quote:
Here's a file for anyone wanting to use the 'Recruiter' nose cone in their projects. It's a composite element, made up of six segments. Because this is intended to be a 'nose cone', it cannot be saved as a 'Subassembly'.
Addendum: RockSim says the weight of the nose cone is 0.096 oz, and the SEMROC website shows it as 0.12 oz. Not bad!
Enjoy!
|
Sometimes Craig and I think so much alike, it scares me. . Here is my guess-timated version of an BC1038 from Semroc in the design below.
This following design that is showing my re-think of the 13mm powered designs. I call this design the Sky-Jack and it uses both my favorite tube the ST10 and nose cone the BC-1038. I would not be afraid to fly this design on an 1/2A3T-4 in a schoolyard or front yard. With the altitude predicted by Rocksim with the A3T-4 I would stick to a good size launch field.
Enjoy and Thanks Again, JP
James Pierson
NAR# 77907
Sky-Jack (13mm)
Launch guide length: 36.0000 In
MOTOR.................MAX. ALTITUDE...........DEP. VELOCITY
1/2A3T-4..............232.13484 Ft............22.3026 ft/s
A3T-4.................527.64436 Ft............10.4633 ft/s
.
|