04-04-2009, 11:54 PM
Incurable SEMROC Fan
Join Date: Mar 2005
Location: Twin Falls, Idaho, USA
New Design -- 1.37X Centuri Micron
This ST-7 to ST-10 upscale works just fine...
on *one* motor.
*If* it's 13mm.
I wrestled with all the usual 18mm motor suspects, but only the 1/2A6-2 gave me relatively gentle deployment velocities. (Color me "*not* a happy camper."
Please note the extra large (that's "muy grande") SE-14 screw eye, which you will no doubt recognize from Semroc's "Tau Zero" kit.
I trotted it out again here, and it seems to do the job.
As you were.
"Centuri Guy"/"Tau Zero"
YORF Member 28
Semroc SAM #0029
"Your lightyears may vary."
“Centuri fret buzz in an updated form.”
Bill “Wallyum” Eichelberger re: Estes Flutter-By
03 Sept 2014