View Single Post
Old 01-03-2009, 01:22 AM
rkt2k1 rkt2k1 is offline
Just another BAR!
Join Date: Mar 2005
Posts: 131
Default Semroc Balsa Reducers (Transitions) - Rocksim Parts

Here is the DRAFT parts file for the Semroc balsa reducers (transitions.) It includes all transitions currently available on Semroc's web site except:

- BR-1120NT

It also contains "reversed" parts which are designated with a [R] after the part number. This allows you to easily add "small to large" and "large to small" transitions without the need to re-input data values. Have to give Craig credit for this cool time saver!

For CG location I used the same 71% of length used for nosecones for the standard transitions and to 29% of length for the "reversed" transitions. This can be changed based on any thoughts / feedback provided.

This file should be considered DRAFT for review purposes only until it can be validated and combined with the tail cone parts that Craig is working on.


... Bill
Attached Files
File Type: csv TRDATA_Semroc Balsa Reducers.CSV (21.9 KB, 253 views)
Reply With Quote