SAROS parts
Carl,
Do you have the balsa equivalents for those Estes SAROS parts in your catalog? I realize the fin can could be fabricated from tubes and balsa fins, maybe a paper wrap, but do you have a BNC and BR that match? Fins? :) |
Quote:
He's definitely got the nose and reducer. the fin can can be reduced to just a couple of shrouds and the fins are an inch in span (maybe a inch and an eighth), the root is probably an inch and a quarter, and the tip is 3/4" with the trailing edge square. |
It's who you know "on the inside"...
2 Attachment(s)
Quote:
http://www.semroc.com/Store/Scripts...?idproduct=1048 TA-2050 http://www.semroc.com/Store/Scripts...p?idproduct=829 Fins should probably be 1/16" balsa. Cheers, |
Thanks, guys! I thought Carl had already put these into his alien contraption, but I couldn't remember the part numbers.
So I guess I no longer have an excuse for not building one... :o |
The Saros also had formed wraps, didn't it?
|
All times are GMT -5. The time now is 01:34 AM. |
Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.