TMRK Pegasus Fin Guide
So I have come to discover the fin guide is off on my TMRK Pegasus. I already have the tube slotted . What to do now? I caught it when I tried to center the engine mount and noticed the fins would not line up. I then double checked the wrap around fin guide and made sure I marked everything correctly and I did. Next I downloaded one from payload bay and sure enough it is off :( Any Ideas?
|
So after scratching my head on this for a little bit I decide to do some online research on the Pegasus launch vehicle. I actually found a principle dimensions print on line and the rear fins are not on 0, 120 and 240 degrees. The top fin is on 0 and the two bottom fins are 23 degrees below 90 and 270 degrees. The fin guide is right. :)
|
Brent,
If you have questions about the TMRK Pegasus contact John Brohm here. He did a detailed build/report on this that he sent me. Unfortunately, it's on the computer that died. I didn't get it posted before it croaked. |
Quote:
Brent, I recently built this, so let me know if you have any questions; The details are still reasonably fresh in my head. :rolleyes: |
Quote:
Uhhhh, errrrrr, ummmmm. I forgot I put it there. :o |
All times are GMT -5. The time now is 11:15 AM. |
Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.