Ye Olde Rocket Forum

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)
-   Scale & Sport Scale Rocketry (http://www.oldrocketforum.com/forumdisplay.php?f=35)
-   -   Boyce Aerospace 1/14 Scale Nike Hercules is here! (http://www.oldrocketforum.com/showthread.php?t=18072)

Flash 09-17-2019 10:54 AM

Boyce Aerospace 1/14 Scale Nike Hercules is here!
 
4 Attachment(s)
The Boyce Aerospace Hobbies Nike Hercules "Builders Kit" is every bit as impressive as the original.
Modeled in a 1/14th scale; this replica is BIG.
Available as a single stage (no electronics needed) 4 engine 24mm cluster or a standard two stage model (staging electronics required) with a four-engine 24mm cluster in the booster and a single 24 mm upper stage.
Revised design features staging electronics in the top of the booster.
Uses PerfectFlight microTimer2 or miniTimer4 (not included)
Upper stage can now be flown separately with included sustainer rail guides or launch lugs.
Upper stage includes screw-on motor retainer.
Larger parachute compartment in the upper stage (parachutes not included).
Guaranteed better fit of the sustainer fins slots and root edge.
More room within nose cone for adding ballast.
All parts printed individually for maximum accuracy and quality.
Decals included.
Detailed assembly instructions included.
The booster is sized around four 29mm tubes (not included) and the upper stage main body is a BT-70 (not included).
Total Length 32.75" - with the booster measuring 11.89" and the sustainer measuring 22.18"
Fin Span for Booster is 9.66"
Fin Span for the Upper Stage is 5.95"
Weighs approximately 16oz before motors.
The Boyce Aerospace Hobbies Nike Hercules "Builders Kit" is the perfect addition to your model rockets.
This model is a 1/14th replica and boasts several enhancements to our initial Nike Hercules release in 2018.
The revised design is sold as a single or two stage kit.
The upper stage can now be flown separately with included sustainer rail guides or launch lugs. The kit stands 32.75" tall and weighs 16oz (before motors).
This kit is 3D printed in bright white ABS plastic and all parts are printed individually to ensure the highest quality parts; tubes are not included. Boyce Aerospace Hobbies Nike Hercules “Builders Kit” includes decals and assembly instructions.

ghrocketman 09-17-2019 01:54 PM

Is this available now ?
Pricing ?

Flash 09-17-2019 01:56 PM

The answer is yes and it is $149.00 in either version

Flash 09-30-2019 08:19 AM

1 Attachment(s)
Another pic of the 3D parts that make up this builders kit.


All times are GMT -5. The time now is 10:33 AM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.