#1
|
|||
|
|||
New Design -- AAA Magnum Nike-Ram 2
AAA Model Aviation Fuels Magnum Nike-Ram 2 rocket 29mm mount.
Although mine was built primarily with parts purchased from Mike at Madcow Rocketry and an Estes PNC-80K nose cone, this Rocksim file features all Semroc parts with a big honkin Semroc BNC-80HK balsa cone. Only exception is the plywood disc plate used to seal the tube coupler for the payload section. I'm sure Semroc could make one from lite-ply to complete the required parts list. Jason started a thread on this model located here and a nice decal set that I used for my build is already available from Sandman: http://www.oldrocketforum.com/showthread.php?t=8475 I hope to put some more F and G fights on it next Saturday. So far only the G40W-7 single use has been used for a successful flight and recovery. I fed the design file a number of E and F EconoJet, Single Use and RMS types and all but one that I selected did well from a 1/4" x 36" rod. The exception being the E23T-5. Although probably a good motor for a small field on a very calm day, you'll need a minimum of 50+ inches to get it stable so a 5 or 6 foot rod would be in order. A fun rocket to build and fly with classic good looks. Length: 44.20" Diameter: 2.64" (BTH-80) Span Diameter: 9.14" Weight: 12.34 oz E23T-5...........644'......Dv 3 FPS........60" X 1/4" rod F42T-8.......1,307'......Dv 33 FPS.......36" X 1/4" rod F35W-8.......1,333'......Dv 32 FPS......36" X 1/4" rod F40W-7.......1,768'......Dv 22 FPS......36" X 1/4" rod G40W-7.......2,242'......Dv 40 FPS......36" X 1/4" rod G80T-10......2,851'......Dv 24 FPS......36" X 1/4" rod H50-10........5,035'......Dv 14 FPS......36" X 1/4" rod .
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates |
#2
|
||||
|
||||
Only needed another 245' on that H50...
Nice one, Steve!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
Thread Tools | Search this Thread |
Display Modes | |
|
|