Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > Vendors
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #61  
Old 08-20-2019, 09:47 PM
BEC's Avatar
BEC BEC is offline
Master Modeler
 
Join Date: Feb 2009
Location: Auburn, Washington
Posts: 2,462
Default

To bring this back to the original topic (I know, spoilsport ) - I received an order from AC Supply today that included examples of both the new Boosted Bertha and the Gryphon glider, but also three Phantoms.

The new version of the Phantom is complete except for adhesives. It even includes the wadding. The cutaway motor is pre-made so none of that cutting out the vacuum-formed part and painting it. The body tube is 5.5 inches long, so it builds up into a model exactly the same size as the Alpha III.

The new clear fin unit and nose cone are not quite as crystal clear as the 1207 Phantoms from ďback in the dayĒ but have a very slightly frosted appearance. This wonít detract from the purpose of the model.

All in all Iím really pleased to see this one back. Iíll be giving one to the Museum of Flight for use in their Ameliaís Aero Club program and one to South Seattle College for use by their rocketry club and newly-created NAR section.

Iíll post a side-by-side with a vintage Phantom after I assemble this one.

The Boosted Bertha uses the new 18mm screw-on motor retainers, which is a nice touch.

Speaking of which, I got a couple of packages of those in this order as well - three sets to a package. The retainer is pretty light - 2.3g for a set, which is 0.9g heavier than an Estes motor hook (the one from the new Phantom, to be particular). A quick dry fit with a model in progress on my workbench says that if you put a motor block in the usual place (for a 1/4 inch motor overhang aft of the tube) these new retainers will be perfectly situated. The motor will protrude 1/8 of an inch aft of the portion of the retainer that you glue to the motor tube and the retaining cap has plenty of threads to go on about two turns and then snug down against the motor. Nice.
__________________
Bernard Cawley
NAR 89040 L1 - Life Member
SAM 0061
AMA 42160
KG7AIE
Reply With Quote
  #62  
Old 08-20-2019, 10:14 PM
ghrocketman's Avatar
ghrocketman ghrocketman is online now
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Michigan
Posts: 9,204
Default

I'm going to build a new Phantom just to launch it to ruin the tube with nasty looking orange ejection junk.
__________________
When in doubt, WHACK the GAS and NEVER touch the brake !!!
No Harm=NO Foul advocate

If you are NOT FLYING LOW in the left lane, you need to GET THE #$&@ OUT of it !

Yes, there is such a thing as NORMAL
, if you have to ask, you probably aren't
!
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 04:01 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2019