#1
|
|||
|
|||
What is 2x a BT-50
I am currently building a model rocket with a BT-50 as the main tube.
I am also building the same model scaled up 2x is there a standard bodytube that is 2x a BT-50? Also do you know of a source for 1/8 launch lug tubes that are about 7-8 inches long? I built a mercury capsule and I need the launch lug to penetrate the body |
#2
|
||||
|
||||
Checkout www.semroc.com
They have an ST-20 tube that is just over two times the diameter of the BT-50. They also have long launch lugs. BMS also sells long launch lugs. Chas |
#3
|
||||
|
||||
ST-18 is slightly smaller than 2x BT-50 and ST-20 is slightly larger..... both are available from Semroc. So are 1/8 inch ID launch lugs up to 9.5 inches long.
__________________
Bernard Cawley NAR 89040 L1 - Life Member SAM 0061 AMA 42160 KG7AIE |
#4
|
||||
|
||||
Jay's Semroc / Estes body tube ratio chart
Quote:
http://www.rocketshoppe.com/info/SemrocEstes.pdf You'll see that Semroc ST-18 is 1.89X (189%) of an Estes BT-50, while a Semroc ST-20 is 2.09X (209%) of a BT-50. If you want an updated version of this chart, please post a reply here on this thread. Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
Thread Tools | Search this Thread |
Display Modes | |
|
|