#1
|
||||
|
||||
Black Hole Probe
Comrades:
Before I throw away the bag, if anyone wants to build the Black Hole Space Probe (and you know who you are . . . ), the eRocket/Semroc part number is FES-1426 for the fins. The fin set includes fins and square balsa for the external detailing. You need an 18" piece of BT-50, 12 BT-50-BT-55 rings, some 1/8 dowel and internals. JimZ has the plans. The nose is available from Estes. Get at least a 15" 'chute because by the time you seal all the wood, this thing is a serious sled. Here's mine against this morning's blue Texas sky. Still in the primer stage, I need to add cardstock details that were originally decals and paint the thing Metallic Blue. This is part of my plan to complete a number of Mostly Done rockets that have been lying around, in some cases for years. In retrospect, this project took impulse buy to a whole new level.
__________________
NAR 79743 NARTrek Silver I miss being SAM 062 Awaiting First Launch: Too numerous to count Finishing: Zooch Saturn V; Alway/Nau BioArcas; Estes Expedition; TLP Standard Repair/Rescue: Cherokee-D (2); Centuri Nike-Smoke; MX-774 On the Bench: 2650; Dream Stage: 1/39.37 R-7 Last edited by MarkB. : 09-23-2018 at 06:05 PM. |
#2
|
||||
|
||||
Also, I have 1 (only one) Black Hole Space Probe decal set left.
Well, that didn't take long... I no longer have 1 Black Hole Space Probe decal left
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ Last edited by sandman : 09-23-2018 at 01:08 PM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|