#1
|
|||
|
|||
Nike Tomahawk-12
I’ve just finished up a sport scale Nike Tomahawk-12 made from Estes Pro Series II parts. I didn’t repaint the Nike Smoke :-)
The Tomahawk fins and the Nike interstage are 3D printed in PETG.
__________________
Charles McGonegal Ciderwright AEppelTreow Winery & Distillery Ad Astra Tabernamque! |
#2
|
||||
|
||||
Wow. That looks very nice!
|
#3
|
||||
|
||||
Is that 18 mm?
|
#4
|
|||
|
|||
Both stages are 29mm motors. The booster is an Estes PSII Nike Smoke with a new nosecone. The Tomahawk is built from parts of an Estes Ventris and Argent with a printed fincan.
__________________
Charles McGonegal Ciderwright AEppelTreow Winery & Distillery Ad Astra Tabernamque! |
#5
|
||||
|
||||
Nice !
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
#6
|
|||
|
|||
How are you going to stage it?
__________________
BAR in his second tour of duty. Nar# 32629 |
#7
|
|||
|
|||
An Eggtimer Proton in the Tomahawk payload transition.
Tubing wiring chases for motor and separation are in place. And yes, the centering rings are printed PETG - I lost access to a laser cutter, so now every problem looks like it has a printable solution.
__________________
Charles McGonegal Ciderwright AEppelTreow Winery & Distillery Ad Astra Tabernamque! |
#8
|
|||
|
|||
Thanks. I appreciate the picture.
__________________
BAR in his second tour of duty. Nar# 32629 |
#9
|
|||
|
|||
__________________
Charles McGonegal Ciderwright AEppelTreow Winery & Distillery Ad Astra Tabernamque! |
#10
|
|||
|
|||
Nice.
__________________
BAR in his second tour of duty. Nar# 32629 |
Thread Tools | Search this Thread |
Display Modes | |
|
|