#31
|
|||
|
|||
My kit came with 2 sheets of 3/32 balsa and the plans call for 2 sheets of BFS-30.
|
#32
|
||||
|
||||
I think only the Avengers prior to the pink "skill level" packaging had different thickness fins. My original beat-up one was pre-skill level packaging and has the thicker fins on the booster only. My NIB pink skill level Avenger has the fins of same thickness.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! |
#33
|
|||
|
|||
The primer is on and next day off I will shoot a coat of Krylon Glossy White and Silver. I will also paint the nose red. I brushed on 3 coats of balsa sealer to the balsa parts, 2 coats of primer and 1 coat of flat white. I am still stuck on what to do about the upper body tube stripes. I cannot tell if that is a decal or black stripes from a Estes decal sheet. Any help would be appreciated.
|
#34
|
|||
|
|||
Quote:
|
#35
|
||||
|
||||
I think it came from one of Estes's stripe decal sheets. So you can order (or make) a full roll pattern (which is what I did for my clone), hunt down a stripe decal sheet from somewhere, or you can paint it on (which is what I did on my Astron Ranger clone). You're pretty good with your masking tape so I think you could pull that off
|
#36
|
||||
|
||||
Quote:
I have an Avenger clone I built a long time ago and painted it like the cover art...which I don't like. I may have to print myself a set and post a pic.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#37
|
|||
|
|||
Here is the picture of my Avenger, will print out the decal today and finish her up.
|
#38
|
|||
|
|||
Printed out the decal on my Alps printer and she is done.
The fun time of masking. My decal, Thaks Space Bus |
#39
|
|||
|
|||
Looks great! I hope you post launch photos soon.
|
Thread Tools | Search this Thread |
Display Modes | |
|
|