#1
|
|||
|
|||
Vintage Estes Solar Warrior Build
Here is my latest build, simple out of the bag ready for 3 coats of Brodak Balsa sealer.
|
#2
|
|||
|
|||
Quote:
__________________
Paul If we weren't all crazy, we would go insane - Jimmy Buffett NAR #87246 www.wooshrocketry.org |
#3
|
|||
|
|||
When I stumbled upon the hobby shop closing in Arlington in 1994, the Solar Warrior was one of the kits that my brother in law picked up for pennies. He's since built it in several forms, regular, upscale, and stretched. I always thought he might try to do one as his level 1 bird.
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Centuri Mini Dactyl Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle In paint: Canaroc Starfighter Scorpion Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II Semroc Cyber III Ready to fly: Estes - Solar Sailer II Semroc - Earmark, Groonie Der V 1/2 |
#4
|
||||
|
||||
Loved the Solar Warrior design.
In addition to the original (bt-20), many years ago, I had downscaled it to bt-5 and upscaled it to bt-50, bt-56, bt-60, 2.14", and 3". Most of those are now either lost, destroyed, or retired. The 3" version usually flew on either I211 or I300 motors.
__________________
https://masa-rocketry.org/ |
#5
|
||||
|
||||
Curious: what is their exact procedure for gluing on the pods? Glue the pylon to the BT first, then glue on the pod? Or pod to pylon, then assembly to BT?
I haven't yet figured out the "optimum" way of doing this. On a recent build I mounted thin strips of wood to the pods, then glued those strips to the pylons after the latter were installed. |
#6
|
|||
|
|||
Quote:
According to the instructions, wings to airframe then pods to wing tips. http://plans.rocketshoppe.com/estes/est0895/est0895.pdf |
#7
|
||||
|
||||
Quote:
Thanks. I guess given the geometry of this particular model that's by far the obvious way. |
#8
|
|||
|
|||
I just glued the pods on as shown on the plans. I have been using Brodak long enough to say I am very pleased with how well it works.
|
#9
|
|||
|
|||
Ken, I did, just need to find the file. I have been real busy again and building has been slow. After 3 coats of Brodak Balsa sealer I painted the rocket flat white followed by Krylon yellow and blue. The decals were a challenge to get on, but after some work they look ok. I still have to brush paint inside the narcells, but other than that she is all done.
|
Thread Tools | Search this Thread |
Display Modes | |
|
|