|
View Poll Results: What SU BP motor is most needed ? | |||
18mm B14-x/B8-x with at least delays of 0,3,5,7 | 17 | 33.33% | |
18mm C5-x | 11 | 21.57% | |
24mm D20-x | 4 | 7.84% | |
29mm E/F50-x | 5 | 9.80% | |
13mm B4-x | 10 | 19.61% | |
13mm 1/2A3-0T | 3 | 5.88% | |
18mm D8-x like the old Cox 13n-sec D8-0/3 | 1 | 1.96% | |
Voters: 51. You may not vote on this poll |
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
||||
|
||||
New Most Needed SU BP motor poll
Out of the following SU BP motors, which is the most needed ?
There are several motors in the current Estes lineup I would give up for these. DITCH entire B6 lineup, keep the B4 series, bring back the B4-6 also along with B14 or B8 Replace the C6-0,3 with C5-0,3 Replace the D12-0,3 with D20-0,3 PLEASE DO NOT EDIT OR MODERATE POSTS IN THIS THREAD FOR ANYTHING BUT POLITICAL OR PROFANE POSTS.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! Last edited by ghrocketman : 10-27-2018 at 03:56 PM. |
#2
|
||||
|
||||
I can whip up a 1/2A3-0T or 1/4A3-0T in a few minutes, but I'd love to see the rest of them produced!
__________________
I love sanding. |
#3
|
||||
|
||||
I have a dozen diamond paks of 1/2A3-0Ts, so that wasn't my choice either.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! |
#4
|
||||
|
||||
The mention of the F50 reminded me of the old F50 Silver Streak BP motors. Those, plus the larger 38mm G160 and H220, were amazing. I brought a number of them home from LDRS in 1994. The passage of time was not kind to them, or the rockets carrying them.
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#5
|
||||
|
||||
I loved the F50. It was a very reliable motor for me. The H220's didn't seem to be as reliable, but it made for some interesting cluster HPR flights. Folks used to love to air start them with thermalite.
__________________
I love sanding. |
#6
|
|||
|
|||
I'd get the most out of a D20-x, especially a D20-0!
* * * I went through a lot of Rocketflite motors back in the day!
__________________
NAR #27085 - Oregon Rocketry - SAM |
Thread Tools | Search this Thread |
Display Modes | |
|
|