#1
|
||||
|
||||
30 Minute Epoxy... What brand do you use?
I've recently read a little about using 30 minute epoxy to make fillets, but I don't remember seeing anything about which brand of epoxy to use.
Any help here would be appreciated. Thanks Jim .
__________________
. . Dreaming of making the rockets I dreamed of as a kid (and then some). "The Guide says there is an art to flying", said Ford, "or rather a knack." "The knack lies in learning how to throw yourself at the ground and miss." Launching is Optional... Landing? That Depends on Trees. |
#2
|
|||
|
|||
|
#3
|
||||
|
||||
Usually Devcon or Great Planes brand.
The stuff they carry at Hobby Lobby is not bad too.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! |
#4
|
|||
|
|||
Quote:
I'll second on this brand it's what I use for my Mid/ HPR Rockets. I use the 15 minute for all internal parts and the 30 minute for fillets.
__________________
John NAR #91135 L1 SAM #0037 |
#5
|
||||
|
||||
I rarely use 30 min epoxy, but when I buy it I just get the stuff from Hobby Lobby. It's BSI (Bob Smith Industries) brand (no relation.)
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
Thread Tools | Search this Thread |
Display Modes | |
|
|