|
#1
|
|||
|
|||
Vintage Estes Honest John 1227 build
While I am waiting for my Centuri F-16 built to be completed I decided to start on my next vintage build. This is a bit more challenging build and I plan on building it per the plans using everything in the kit except the rubber cords. Even though this is an old kit the rubber is in great condition but I will still replace it with Estes new rubber.
|
#2
|
||||
|
||||
Why use the stupid rubber at all?? That crap is WORTHLESS IMHO... I've had practically new rockets where the rubber failed at deployment and dropped the rocket to streamline in and core sample while the nose cone floated into the next county.
After that, first thing I do is throw that worthless rubber away in a box for rubber band guns or cat toys, and replace it with good quality sewing elastic. Have yet to have one of those cords fail... Later! OL J R
__________________
The X-87B Cruise Basselope-- THE Ultimate Weapon in the arsenal of Homeland Security and only $52 million per round! |
#3
|
||||
|
||||
Quote:
Hear! Hear! I too have had boosters fall to the ground at mach 2 and watched helplessly as the canopied nose cone drifts away to the next zip code from a broken rubber shock cord. I too have NEVER had a quality sewing elastic cord break (even a burned one.)
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#4
|
||||
|
||||
Joe Wooten won himself a Starport Sagitta Cantina T shirt for coming up with the best idea on what you can do with the rubber shock cord over at the Cantina forum.
__________________
Bernard J. Herman Ohio RLS Starport Sagitta Rockets email bherman@sagittarockets.com NAR # 97971 SR What's your idea on the best way to change Washington D.C.? Let us know at the Cantina Sagitta Cantina We're looking for a few good Catos, please tell us about any you may have had. Survey of Anecdotal Malfunctioning Engines or S.A.M.E. |
#5
|
|||
|
|||
Never had any issues.
|
#6
|
||||
|
||||
Estes rubber shock-cords have ALWAYS SUCKED.
For decades I have replaced them with sewing-elastic as well. For the past 20 odd years I have used a Kevlar leader on the engine mount that I tie the shock-cord to about 3" above the top of body tube. I zipper-proof the Kevlar for about 1/2" above and below the top of the body tube. Yes, it is a non-stock method even on the 'vintage' kits I build, but it makes them BETTER and more durable. It should be the STOCK method of ALL LPR and MPR recovery harnesses.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
Thread Tools | Search this Thread |
Display Modes | |
|
|