#1
|
|||
|
|||
Thrustline Aerospace Duster Plans
The link below will take you to the plans for the Duster kit.
Each plan set also includes a RockSim file for the kit. That's a good thing since nowhere could I find a parts list of tubing type, length, etc. I'd appreciate it if someone with RockSim or OpenRocket will give me a hand by adding a reply to this post listing the parts type/size you extract from the RockSim file. If you could include the templates from the RockSim file I'd appreciate that as well. http://www.oldrocketplans.com/tla/TLA_Duster.zip These Thrustline Aerospace plans are for PERSONAL USE ONLY! John Rowan-Stern and Thrustline Aerospace reserves all commercial use rights.
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 Last edited by Ltvscout : 02-16-2019 at 12:53 PM. |
#2
|
||||
|
||||
Scott,
Attached below is the data for the Thrustline Aerospace Duster from the RockSim File TLA Duster Parts Nose cone Estes - Estes - PNC-55AC, Material: Polystyrene PS Nose shape: Hollow Ogive, Len: 5.4030 In., Dia: 1.3250 In. Wall thickness: 0.1250 In. Body insert: OD: 1.2000 In., Len: 0.5000 In. Screw Eye FlisKits - SE-M - Screw Eye - Medium, Mass: 0.0350 Oz. Body tube Estes - EST 3087 - BT-55, Material: Paper OD: 1.3248 In. , ID: 1.2830 In. , Len: 17.0000 In. Kevlar Shock Cord - Custom, Material: 70 Lb. kevlar Mass: 0.0098 Oz Elastic Shock Cord - Custom, Material: 1/4 In. flat elastic Mass: 0.1207 Oz. Parachute - Custom, Material: Mylar 1 parachute, Shape: 6 sided Dia: 18.0000 In., Spill hole: 0.0000 In. Mass: 0.1881 Oz. Tube coupler - Custom, Material: Paper Tube coupler OD: 1.2830 In., Hole #1: : 30.8000 In. Len: 2.0000 In. Location: 15.9961 In. From the front of Body tube Body tube Estes - EST 3087 - BT-55, Material: Paper OD: 1.3248 In. , ID: 1.2830 In. , Len: 17.0000 In., Mass: 0.9436 Oz. Engine tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 2.7559 In. Location: 14.2402 In. From the front of Body tube Engine block - Custom, Material: Paper Engine blockOD: 0.9500 In., Hole #1: : 18.8800 In. Len: 0.2500 In. Location: 0.0000 In. From the front of Engine tube Engine hook Estes - Engine hook - Standard size, Mass: 0.0494 Oz. Centering Ring - Custom, Material: Paper Centering ringOD: 1.2830 In., ID: 0.9760 In., Len: 0.0594 In. Location: 0.5000 In. From the base of Body tube Centering Ring - Custom, Material: Paper Centering ringOD: 1.2830 In., ID: 0.9760 In., Len: 0.0594 In. Location: 2.5059 In. From the base of Body tube Launch lug Estes - ESTES 2321 - LL-1/8, Material: paper OD: 0.1250 In., ID: 0.1125 In., Len: 0.6309 In., Loc: 16.3772 In. CG: 0.3155 In. Launch lug Estes - ESTES 2321 - LL-1/8, Material: paper OD: 0.1250 In., ID: 0.1125 In., Len: 0.6309 In., Loc: 4.2350 In. CG: 0.3155 In. Custom Fin set - Forward - 3 fins Material: Balsa (0.125" thick) Radial angle 0 degrees Point List in mm : 177.8, 0. 206.238553719008, 41.2 163.752592975207, 21.41 0., 0. Custom Fin set - Aft - 3fins Material: Balsa (0.125" thick) Radial angle 0 degrees Point List in mm : 142.456680655306, 0. 58.37, 45.95 32.3873805309734, 45.95 0., 0.
__________________
Bruce S. Levison, NAR #69055 Last edited by teflonrocketry1 : 02-19-2019 at 07:59 PM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|