|
#1
|
|||
|
|||
Interceptor fin guide
I'm looking for a scan or drawing of the K50 fin marking guide. A search of YORF didn't turn up anything, and I didn't see a template on JimZ either. Thanks!
-Paul |
#2
|
||||
|
||||
Sure there is. It's in the PDF file.
I've used it to make a standard size, two smaller sizes and a BT-80 sized monster. I have a lot of the patterns already scaled.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ Last edited by sandman : 03-27-2006 at 12:07 PM. |
#3
|
||||
|
||||
Quote:
Gordon, I think you're talking about the fin patterns and he's talking about the fin position guide to mark the body tube? Anyway, here's a couple of files I found somewhere on the Internet that may be helpful. Mike Fields |
#4
|
||||
|
||||
Ahh, I see...I made an upscale one for...an upscale.
Hey...wait just one minute!!! Just where did you find that fin alignment guide? I drew that! Honest! That is my drawing!
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#5
|
||||
|
||||
Quote:
I have a redrawn marking template for this kit if you are interested. I drew it in Illustrator and the angles are all symetrical and should be a little better than the Estes one. Let me know if you would be interested in this template. |
#6
|
||||
|
||||
We think alike, Sandman. I turned a practice cone for the Interceptor out of some scrap pine the other day. I'll do one out of balsa soon.
|
#7
|
||||
|
||||
Can I take you up on the Illustrator files for K-50, Kurt? I'm having a devil of a time in my redraw.
|
#8
|
||||
|
||||
Quote:
Bob, Here is the marking guide. To explain about this guide though, it is an evenly spaced recreation of what I thought the original Estes one should be. It looked pretty good on my clone. If you want or need the decal files, I think those are on Scott's site or I will send them to you too. Let me know. Kurt |
#9
|
||||
|
||||
FWIW, here is a (relatively poor) picture of my recent Interceptor clone next to its 30+ year-old brother.
|
#10
|
|||
|
|||
Quote:
Nice pic Kurt. I hope to have a 'matching' set soon. Do you still fly them both? -Paul |
Thread Tools | Search this Thread |
Display Modes | |
|
|