|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
[FOUND] Six Pack ( Impulse Aerospace, Rocket Vision, Rugged Rockets )
I'm looking for one of these, dead or alive. I have the .rkt from EMRR which gets me in the ballpark.
If you have one ( destroyed , built, open, new ) drop me a PM. I'm particularly interested in verifying the tubefin measurements and/or comparing your instruction sheet with the two I have. Cheers, -dh. Last edited by dhbarr : 02-11-2017 at 12:14 AM. |
#2
|
||||
|
||||
Quarterly Poke.
|
#3
|
|||
|
|||
I have one. I built it around 1993-4 I think. PM me and tell me what you need. I'm not sure I still have the instructions, though I'll look for them.
It is indeed a rugged rocket! Just about bulletproof. Use epoxy, 30 minute, and you'll be pleased! Allen |
#4
|
||||
|
||||
Long side of the fins, short side of the fins, tube thickness, ID, OD, as many pics as you can stand?
I'd like to downclone to 29mm MD on BMS 52H tubing, assuming I can find a suitable NC. |
#5
|
||||
|
||||
From Elsewhere:
Body Tube: https://www.mcmaster.com/#8527k144/=169rzw7 Nose Cone Design: http://www.thingiverse.com/thing:2095927 ID = 1.0" OD = 1.125" L = 10.0" NC = 4.25" Root = 2.0" Tip = 1.25" I think a cut-up Go Devil 29 will be just right! |
Thread Tools | Search this Thread |
Display Modes | |
|
|