#1
|
||||
|
||||
[WANTED] Estes Zoom Broom (0853) Fins Scan (w/ruler)
Just changed my mind on making two Cloudhoppers for my SPY vs SPY theme... A Zoom Broom should be what one is using where the other is using the Cloudhopper.
JimZ's site is missing the fins as far as I could tell, and ORP's is a lacks a ruler to provide exact scale. If you've got one to scan, I'd appreciate it. Thanks! Jim .
__________________
. . Dreaming of making the rockets I dreamed of as a kid (and then some). "The Guide says there is an art to flying", said Ford, "or rather a knack." "The knack lies in learning how to throw yourself at the ground and miss." Launching is Optional... Landing? That Depends on Trees. Last edited by K'Tesh : 05-29-2015 at 02:19 PM. |
#2
|
||||
|
||||
Oh... How thick are the fins?
__________________
. . Dreaming of making the rockets I dreamed of as a kid (and then some). "The Guide says there is an art to flying", said Ford, "or rather a knack." "The knack lies in learning how to throw yourself at the ground and miss." Launching is Optional... Landing? That Depends on Trees. |
#3
|
|||
|
|||
about the best I can do. the fin stock is 3/32", bt-60 x 5", and mine came stock w/ a 2 piece nose but otherwise same shape and size of the current B Bertha nose. I would suggest doing some surgery on the nose to shorten the excess plastic aft of the shoulder to make room for the chute.
it goes about 100' on an A10-3t...half the time the chute doesn't have time to open. you really should paper the vert stabilizer. Rex |
Thread Tools | Search this Thread |
Display Modes | |
|
|