#1
|
|||
|
|||
WTB RDC Enerjet 8 Motor
Looking to buy an original Rocket Development Corp. Enerjet 8 motor, preferrably with instructions and igniter.
Any help ? |
#2
|
||||
|
||||
Quote:
Well, you can certainly read about the Enerjet 8's development in a great interview we're publishing with Irv Wait in the March/April issue of LAUNCH. You'll see several images of the Enerjet 8 and other RDC motors. I'm attaching a pic of my own Enerjet 8 still in the packaging. Unfortunately it's the only one I own, so I can't sell it. But I do have an extra set of instructions that I'd be more than happy to scan for you whenever you need them. By the way, Mark Johnson did the interview with Irv for us, and it's one of the best discussions of rocket motors that I've read. (OK, now I'll quit trying to sell LAUNCH to you! ) Mark
__________________
Mark Mayfield NAR #14464 launchmagonline.com Last edited by msm0202 : 01-18-2007 at 04:52 PM. |
#3
|
||||
|
||||
That one is going to be a tough one to find.
That motor was not produced nearly in the numbers that the later Enerjet F67, F52, and E24 were by Centuri in the late 60's/early 70's. More than likely anyone willing to sell one will want the equivalent weight in GOLD for the motor.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! |
#4
|
|||
|
|||
Quote:
Mark, You know where you can send a scan of those motor instructions!
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 |
#5
|
||||
|
||||
Quote:
Scott, They're on the way! Mark
__________________
Mark Mayfield NAR #14464 launchmagonline.com |
#6
|
|||
|
|||
Quote:
Mark, Thank you for the offer. Yes please send me a scan of the instructions. And thanks for the info about the upcoming article. You saved me some work as I was planning to write one about the motor after I got one in my hands. Brad |
Thread Tools | Search this Thread |
Display Modes | |
|
|