#1
|
||||
|
||||
Baby Bertha Cluster (was Big Bertha Cluster)
What the title says. I'm considering building a Big Bertha as a dual 18mm cluster. I haven't built a cluster in 25 years, and I think I only flew the first one once. I'm thinking about putting a Sunward mount into an otherwise stock Big Bertha.
... or a Baby Bertha. I might never see it again, though ...
__________________
NAR # 115523 Once upon a better day... SAM #0076 My site: http://rocketry.gonnerman.org Last edited by Solomoriah : 05-14-2007 at 07:06 AM. |
#2
|
|||
|
|||
Nah, that should work fine. If you go with a three x18mm cluster you'll have a Ranger.
Sort of.
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Centuri Mini Dactyl Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle In paint: Canaroc Starfighter Scorpion Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II, Xarconian Cruiser Semroc Cyber III Ready to fly: Estes - Solar Sailer II Semroc - Earmark, Groonie Der V 1/2 |
#3
|
|||
|
|||
Quote:
Or you could go nuts and build the "Dolly" (don't ask... LOL) As shown here from an old Pearl River convention Here's a picture of the tail end of Dolly Bertha ahhh, to be young, foolish and still have hair... LOL
__________________
FlisKits, Inc. http://fliskits.com/ Model rocket kits and MORE! Toad's Tavern - http://toadstavern.com/ Personal site - http://jflis.com/ |
#4
|
||||
|
||||
I'm thinking strongly about a two-engine cluster in a Baby Bertha. Sunward makes nice engine mounts, but buying just one and paying shipping and handling doesn't make much sense. Outside of Estes and Quest kits, I can't get much in the local area... certainly not parts. JonRocket carries the Sunward parts but does not carry Estes rockets... gah.
So I guess I need to figure out a few more things that I need from JonRocket. That will hold up my build for a while. Or I could roll my own cluster engine mount...
__________________
NAR # 115523 Once upon a better day... SAM #0076 My site: http://rocketry.gonnerman.org |
#5
|
|||
|
|||
FlisKits also sale’s Cluster Motor Engine-Mounts as will as Canted Cluster Motor Mounts, see EMK2-CL002 motor mount for a BT-60 body tube.
http://www.fliskits.com/products/01prod_fs.htm |
#6
|
||||
|
||||
Yeah, I see that.
If I could just find someone who would sell me a Baby Bertha and a BT-60 cluster engine mount in the same order... I'll probably buy the kit at Hobby Lobby, actually. Love those 40% off coupons. Which probably means I'll roll my own cluster engine mount, since I can't buy them locally and I can't justify $6.00 in shipping/handling for a $4.00 part.
__________________
NAR # 115523 Once upon a better day... SAM #0076 My site: http://rocketry.gonnerman.org |
#7
|
|||
|
|||
Quote:
Cut your own. They don't have to be perfect. They just have to fit.
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Centuri Mini Dactyl Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle In paint: Canaroc Starfighter Scorpion Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II, Xarconian Cruiser Semroc Cyber III Ready to fly: Estes - Solar Sailer II Semroc - Earmark, Groonie Der V 1/2 |
#8
|
||||
|
||||
I suppose. Anybody have a pattern?
... yes, I'm lazy.
__________________
NAR # 115523 Once upon a better day... SAM #0076 My site: http://rocketry.gonnerman.org |
#9
|
||||
|
||||
Quote:
How about an engine mount program? Click below and look for "Engine Mount/Bulkhead Template Generator". It's free. http://www.rocketreviews.com/tools.shtml |
#10
|
||||
|
||||
Excellent, thanks!
__________________
NAR # 115523 Once upon a better day... SAM #0076 My site: http://rocketry.gonnerman.org |
Thread Tools | Search this Thread |
Display Modes | |
|
|