#111
|
||||
|
||||
A minor clarification, please...
Quote:
Inquiring minds want to know. Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#112
|
||||
|
||||
Quote:
There's an option on the "Save As" dialog; it's not in the File | Menu per se, but in the actual "Save As" dialog on the far-right. There's a drop-down box which allows you to save in formats all the way back to Draw 7.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#113
|
||||
|
||||
Quote:
InkScape is Open Source (i.e. Free) and handles SVG just fine. The Gimp (another Open Source program) can read SVG but doesn't always do a good job with it. I've used both in concert, i.e. InkScape to convert the image to a bitmap, then Gimp to polish it, with good success. I really hate to buy software, but that's a rant for another day.
__________________
NAR # 115523 Once upon a better day... SAM #0076 My site: http://rocketry.gonnerman.org |
#114
|
||||
|
||||
Quote:
I bought my copy of Corel Draw only because "He Who Cuts Out Our Fins With Death Rays" says his machine takes this format. That's good enough reason for me...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#115
|
||||
|
||||
"Stare Directly into the Laser Beam, please..."
Quote:
"Monsters from the Id!" (Vincent Price voice) "--Or is that *Idaho?*" (maniacal laughter) http://www.oldrocketforum.com/showt...hlight=Mu-tater Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#116
|
||||
|
||||
By "this format," do you mean SVG? SVG is the NATIVE format of InkScape, while it is an "export" for Corel. If I ever get the urge to have fins custom cut, I'll try InkScape first.
__________________
NAR # 115523 Once upon a better day... SAM #0076 My site: http://rocketry.gonnerman.org |
#117
|
||||
|
||||
Quote:
No, the native format for Corel Draw is CDR. His laser apparently can accept Draw 10 CDR files directly as input. It doesn't accept Draw 12 CDR files, however.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#118
|
|||
|
|||
New Design: Nebula
This particular design called Nebula, and I have redone it several times. The forward fin set on this design does not help the margin much. I finally can up with a way to add clay nose wieght without drilling the nose cone. Clay can be added by cutting the main BT 1.5 to 2 inches aft of the BNC and add a balsa tube coupler at this joint. The clay can be added in the hollow BT section between the BNC coupler and the Balsa Tube Coupler . The 2D drawing might help better explain this method .
This design is inspired by a vintage sci-fi magazine cover called Nebula issue #27. It is an 18mm design and falls in the VR class of designs. All Semroc parts have been used. Enjoy and Thanks Again, JP James Pierson NAR# 77907 |
#119
|
||||
|
||||
New Plan -- Sizzler
OK, so this is a tired name that's been abused too often. I figured I couldn't do any worse...
Length: 16.10" Diameter: 1.04" (ST-10) Fin Span: 4.04" Weight: 1.13 oz A8-3.......239'......Dv 6 FPS.......36" x 1/8" rod B4-4.......521'......Dv 10 FPS......36" x 1/8" rod B6-4.......525'......Dv 14 FPS......36" x 1/8" rod C6-5......1045'......Dv 8 FPS.......36" x 1/8" rod It's a simple build, and should be a good stable flyer. Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#120
|
||||
|
||||
New Plan -- Eclipse
Eclipse is 13mm powered and has reasonable performance for its size. I'm putting this one in the "Schoolyard Sounders" category.
Length: 16.70" Diameter: 0.908" (ST-8) Fin Span: 3.908" Weight: 1.08 oz 1/2 A3-2T......113'......Dv 13 FPS......36" x 1/8" rod A10-3T.........314'......Dv 16 FPS......36" x 1/8" rod A3-4T..........319'......Dv 14 FPS......36" x 1/8" rod May be one of my next build projects... Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
Thread Tools | Search this Thread |
Display Modes | |
|
|