03-05-2008, 11:34 PM
|
BP Mafia
|
|
Join Date: Mar 2005
Location: Ft. Thomas, KY
Posts: 8,622
|
|
Quote:
Originally Posted by snaquin
SLS Magnum-D Hornet
Upscale based on 5341 Centuri Magnum-D Hornet available from 1980-1983. I based this upscale on BTH-70 tubing also used in the Semroc SLS ARCAS kit. I had purchased an extra nose cone, centering rings and a couple of cut lengths of BTH-70 after I purchased the SLS ARCAS kit so I actually have most of the parts on hand.
Length: 32.9"
Diameter: 2.25" (BTH-70)
Fin Span: 9.89"
Weight: 7.44 oz
One RockSim file has the standard 29mm mount and the other file has the 24mm EM-9115 adapter installed. It's light enough to fly off a standard 36" launch rod with either a D12 or E9 black powder engine and simmed well on many E through G reloads. It shares basswood fins with other SLS type kits and fins mount through the wall to the engine mount. TTW fin tabs can be shortened some but I was looking at the worse case scenario with weight and EM-9115 installed for stability.
The decal in RockSim did not render well {and of course I could not force RockSim to make three of the fins yellow} but you get the basic idea from the 3D image. I would most likely have either Excelsior make an upscale water-slide or use Dave again with Graphix & Stuff for a self adhesive vinyl version.
My plans are to build it so it's in the queue .....
.
|
While not a true SLS-esque project, I do have an old Hornet project that I recently resurrected. In 2001, my brother in law did an upscale of Der Big Red Max based on an L.O.C. Lil Nuke. Ever since then I wanted to try something similar. That Christmas he bought me a Lil Nuke kit and I got started on what I called the Hemi Hornet. Not knowing a lot about what I was doing, I used a cheap 60 second epoxy to attach the fins and they came out wobbly. I got mad, stuffed the project under the rocket shelf, and forgot about it. I dragged it out and dusted it off last weekend. The fins look like the teeth you see on people buying scratch off lottery tickets, so I ripped them off and I'm going to start again. The decal was printed a long time ago and I don't know where it got to, so I guess that's going to have to be re-done also. Pics at this point are out of the question, but once it gets off life support I'll try to take a few.
__________________
Bill Eichelberger
NAR 79563
http://wallyum.blogspot.com/
I miss being SAM 0058
Build floor: Centuri Mini Dactyl Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle
In paint: Canaroc Starfighter Scorpion Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II, Xarconian Cruiser Semroc Cyber III
Ready to fly: Estes - Solar Sailer II Semroc - Earmark, Groonie Der V 1/2
|