View Single Post
  #25  
Old 07-09-2008, 01:43 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default

OK, the GS-348 has flown twice in Mobile, Alabama! I flew it in my backyard using 1/4A3-3T motors. On both flights, the model started off falling just as advertised, in a flat spin, but as the decent progressed, it changed into a ballistic fall. The first flight poked itself about an inch through the grass into the dirt with no damage. The second flight bounced, but still no damage beyond a little skuffing of the finish. There was a bit of paint bubbling between the vent holes from the deployment charge.

The first attempt (not counted) was a partial flight, BTW. The launch controller leads got hung on the motor hook and the model pulled the leads about 8' in the air. It dropped to the ground and the ejection charge fired after touchdown.
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote