07-15-2010, 09:54 PM
|
Craftsman
|
|
Join Date: Jul 2010
Posts: 128
|
|
Quote:
Originally Posted by Doug Sams
You mention ripping the paper. Did you glue the entire area of the paper? Or only the perimeter?
Normally, for pre-prime sanding, I use 220 grit, maybe 320.
Doug
.
|
Hi Doug:
Yes, I first smeared a very light coat of elmers onto the fin. Once dried overnight I then sanded the edges then applied the CA. I've since applied duplicolor primer/filler and the fins look pretty crappy as in I've got a few of the horrid airpockets. I'm going to allow a good dry time, sand and see if I can just put on some sanding sealer first, then F and fill and call it done! Hope this makes sense! Take care, Jeff
|