sandman
05-06-2012, 09:23 AM
Decal in question is for the NASA Pegasus kit #1376.
http://www.oldrocketplans.com/estes/est1376/est1376.htm
I seem to have a scaling problem.
What I based my "correct" scale on was the Red stripes at the top of the decal sheet that go around the two BT-50 jet intake tubes on the sides.
Part "F" on the parts list shows it as a BT-50.
A BT-50 is 0.976 O.D. times Pi (3.1416)= 2.94". I made it a tiny bit longer at 2.96" for some overlap.
That shows to be correct on my decal.
Can someone verify this?
http://www.oldrocketplans.com/estes/est1376/est1376.htm
I seem to have a scaling problem.
What I based my "correct" scale on was the Red stripes at the top of the decal sheet that go around the two BT-50 jet intake tubes on the sides.
Part "F" on the parts list shows it as a BT-50.
A BT-50 is 0.976 O.D. times Pi (3.1416)= 2.94". I made it a tiny bit longer at 2.96" for some overlap.
That shows to be correct on my decal.
Can someone verify this?